Winch Accessories – Fairleads, Remotes, Isolators, Ropes, Hooks & Mounts

Complete your winch setup with the right accessories for safety, performance and longevity. From hawse/roller fairleads and wireless remotes to isolator switches, hooks/thimbles and replacement lines, these parts make rigging faster and protect your investment on harsh trails.

In this section: Browse all categories • Accessories – Quick Comparison • Fitment & Compatibility Guide • How to Choose • Care & Durability • Upgrade Sequence Roadmap • Related Sections • FAQ

Key Features

• Hawse (synthetic) and roller (steel cable) fairleads
• Wired and wireless remotes, control box relocation looms
• Battery isolator switches and high-quality cabling
• Hooks, thimbles, rope guards and end hardware
• Replacement UHMWPE ropes and steel cables, winch covers

Quick Comparison – Common Winch Accessories

Buyer’s Checklist – How to Choose

• Line type: choose a hawse for synthetic rope and a roller for steel cable
• Control: pair a wireless remote with a wired backup
• Safety: install an isolator within easy reach of the engine bay
• Protection: add a rope guard or offset hawse to clear sharp bumper edges
• Replacement lines: match rope/cable diameter and max drum length; pre-tension after install

Fitment & Compatibility Guide

Confirm dimensions and electrical specs before purchasing.

• Fairlead mount: most 4x4 bumpers use ~254 mm (10") bolt centres (check yours)
• Rope/cable Ø: common sizes 8–12 mm (match winch rating and drum)
• Remote ports: verify plug type and voltage; keep a spare lead
• Isolator rating: continuous current equal to or above winch draw; short, heavy cables
• Clearance: ensure hook/thimble stores without contacting bodywork

Care & Durability

• Inspect hawse/rollers for burrs; file/replace if damaged
• Rinse mud/salt; dry remotes and connectors after wet use
• Check hook latch springs and thimble crimps regularly
• Protect synthetic rope from heat; use sleeves at contact points
• Test remotes and isolator function before trips

Upgrade Sequence Roadmap

1. Match rope type to the correct fairlead
2. Add wireless remote and keep a wired remote as backup
3. Install a battery isolator with labelled on/off positions
4. Fit rope guard/offset hawse if bumper edges are close
5. Carry replacement line and a recovery ring + soft shackle in your kit

Related Sections

• Winches – Synthetic Rope
• Winches – Steel Cable
• Recovery Rings
• Ropes & Tow Straps

FAQ – Winch Accessories

Can I use a hawse fairlead with steel cable?

No. Hawse fairleads are for synthetic rope. Use a roller fairlead with steel cable.

Do I need a wireless remote if I have a wired one?

Wireless adds convenience and safer positioning, but always keep a wired remote as a reliable backup.

Where should I mount the isolator switch?

In the engine bay or near the battery, reachable with the bonnet open. Clearly label it and keep cable runs short.

What diameter rope/cable should I buy as a replacement?

Match the original size (commonly 8–12 mm) and ensure the drum can accommodate the length without overfilling.

How do I protect synthetic rope from abrasion?

Use a smooth hawse, add abrasion sleeves at contact points, and avoid dragging over sharp edges. Consider a rope guard/offset hawse.

Are wireless remotes waterproof?

Most are weather-resistant, not submersible. Keep them dry when possible and store spares in your glovebox.

Can I relocate the control box?

Yes, with a proper relocation loom. Ensure correct cable gauge and keep the box accessible for service.